2-3 Ton Tilt Grading Buckets
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
This bucket has can tilt up to 45 degrees in both directions (total of 90 degrees) and plugs into hydraulic circuit on your excavator.
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
This bucket has can tilt up to 45 degrees in both directions (total of 90 degrees) and plugs into hydraulic circuit on your excavator.
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
You may also need...
JCB 1CX Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 1CX excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 1CX excavators...
You may also need...
Bobcat E35 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E35 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E35 excavat...
You may also need...
JCB 8035 ZTS Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8035 ZTS excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8035 ZTS excav...
You may also need...
JCB 802 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 802 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 802 excavators...
You may also need...
JCB 8029 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8029 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8029 excavator...
You may also need...
CAT 303.5 Tilt Grading Bucket 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit CAT 303.5 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit CAT 303.5 excavato...
You may also need...
Yanmar VIO27 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar VIO27 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar VIO27 excav...
You may also need...
Bobcat 425 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 425 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 425 excavat...
You may also need...
Bobcat E25 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E25 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E25 excavat...
You may also need...
New Holland E25-2SR Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit New Holland E25-2SR excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit New Holland E25-2S...
You may also need...
Bobcat 334 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 334 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 334 excavat...
You may also need...
Bobcat X328 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X328 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X328 excava...
You may also need...
Takeuchi TB125 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Takeuchi TB125 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Takeuchi TB125 exc...
You may also need...
Bobcat X331 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X331 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X331 excava...
You may also need...
JCB 8032 ZTS Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8032 ZTS excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit JCB 8032 ZTS excav...
You may also need...
2L Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2L SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2L SKU excavators....
You may also need...
3C Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 3C SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 3C SKU excavators....
You may also need...
3A Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 3A SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 3A SKU excavators....
You may also need...
2P Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2P SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2P SKU excavators....
You may also need...
2M Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2M SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2M SKU excavators....
You may also need...
2H Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2H SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2H SKU excavators....
You may also need...
2F Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2F SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2F SKU excavators....
You may also need...
2J Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2J SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2J SKU excavators....
You may also need...
2C Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2C SKU excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit 2C SKU excavators....