1.5 Ton Tilt Grading Buckets
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
This bucket has can tilt up to 45 degrees in both directions (total of 90 degrees) and plugs into hydraulic circuit on your excavator.
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
This bucket has can tilt up to 45 degrees in both directions (total of 90 degrees) and plugs into hydraulic circuit on your excavator.
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
Filter this collection by your machine make & model:
You may also need...
Bobcat E20 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E20 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E20 excavat...
You may also need...
Kubota U17-3 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota U17-3 excavators with Quick Attach or Standard 2 Pins. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota U17-3 excav...
You may also need...
Deere Wedgelock Quick Attach 17G Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Deere 17G excavators with Wedgelock Quick Attach. Using the same hydraulic circuit...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Deere 17G excavato...
You may also need...
Kubota KX018-4 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX018-4 excavators with Quick Attach or Standard 2 Pin. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX018-4 exc...
You may also need...
CAT 301.8 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.8 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.8 excavato...
You may also need...
Yanmar VIO17 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar VIO17 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar VIO17 excav...
You may also need...
Bobcat E10 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E10 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E10 excavat...
You may also need...
Takeuchi TB216 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Takeuchi TB216 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Takeuchi TB216 exc...
You may also need...
Kubota KX41-3 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excavators with Quick Attach or Standard 2 Pins. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excava...
You may also need...
Kubota KX41-2 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41-2 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41-2 exca...
You may also need...
JCB 8018 / 8018 CTS Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8018 / 8018 CTS excavators. Using the same hydraulic circuit as...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8018 / 8018 CT...
You may also need...
CAT 301.7D Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7D excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7D excavat...
You may also need...
CAT 301.7DCR Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7DCR excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7DCR excav...
You may also need...
Bobcat X324 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat X324 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat X324 excava...
You may also need...
Bobcat 418 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat 418 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat 418 excavat...
You may also need...
Deere Wedgelock Quick Attach 17P Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Deere 17P excavators with Wedgelock Quick Attach. Using the same hydraulic circuit...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Deere 17P excavato...
You may also need...
Kubota U17 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota U17 excavators with Quick Attach or Standard 2 Pins. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota U17 excavat...
You may also need...
XCMG XE20E Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE20E excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE20E excavat...
You may also need...
XCMG XE18U Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE18U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE18U excavat...
You may also need...
XCMG XE15U Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE15U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE15U excavat...
You may also need...
Deere 110TLB Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 110TLB excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 110TLB excav...
You may also need...
Deere 30G Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 30G excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 30G excavato...
You may also need...
CAT 301.4C Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.4C excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.4C excavat...
You may also need...
CAT 301.5 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.5 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.5 excavato...
You may also need...
Hitachi ZX19U Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX19U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX19U exca...
You may also need...
Yanmar B15-3 Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar B15-3 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar B15-3 excav...
You may also need...
Yanmar SV18 Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar SV18 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar SV18 excava...
You may also need...
Yanmar SV15 Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar SV15 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Yanmar SV15 excava...
You may also need...
Kubota KX41 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excavators with Quick Attach or Standard 2 Pin. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excava...
You may also need...
JCB 8014 / 8014 CTS Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8014 / 8014 CTS excavators. Using the same hydraulic circuit as...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8014 / 8014 CT...
You may also need...
JCB 8015 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8015 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8015 excavator...
You may also need...
Hitachi ZX17U-2 Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX17U-2 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX17U-2 ex...
You may also need...
JCB 8016 / 8016 CTS Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8016 / 8016 CTS excavators. Using the same hydraulic circuit as...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8016 / 8016 CT...
You may also need...
Hitachi ZX16 Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX16 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX16 excav...
You may also need...
CAT 302CR Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 302CR excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 302CR excavato...
You may also need...
Hitachi ZX17U Tilt Grading Bucket - 39" / 990mm
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX17U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 39 inch tilting grading bucket is designed specifically to fit Hitachi ZX17U exca...