Tilt Grading Excavator Buckets
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
Using the same hydraulic circuit as a thumb, the Rhinox tilt grading bucket can tilt up to 45 degrees left and right (total of 90 degrees).
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
The Rhinox excavator tilt grading bucket is the solution for grading on an angle. It makes shaping complex areas faster and easier.
Using the same hydraulic circuit as a thumb, the Rhinox tilt grading bucket can tilt up to 45 degrees left and right (total of 90 degrees).
Manufactured for 0.5 to 8 ton / 1k to 16k lbs excavators. Available for standard 2-pin, Bobcat X-Change, Kubota Quick Attach and Deere Wedgelock.
Be aware - Rhinox only provide the hoses and hydraulic fittings from the attachment to the headstock. You must source the hydraulic hoses from the headstock to the excavator hydraulic lines.
You may also need...
Bobcat E26 X-CHANGE Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E26 X-CHANGE excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat E26 X-CHANG...
You may also need...
Kubota U25-3 Quick Attach Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota U25-3 excavators with Quick Attach. Using the same hydraulic circuit as...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota U25-3 excav...
You may also need...
Kubota KX121 Quick Attach Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota KX121 excavators with Quick Attach. Using the same hydraulic circuit as...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota KX121 excav...
You may also need...
Kubota KX71-3 Quick Attach Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota KX71-3 excavators with Quick Attach. Using the same hydraulic circuit as...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Kubota KX71-3 exca...
You may also need...
Bobcat X331 X-CHANGE Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X331 X-CHANGE excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat X331 X-CHAN...
You may also need...
Bobcat E32 X-CHANGE Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E32 X-CHANGE excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat E32 X-CHANG...
You may also need...
Kubota KX41-3 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excavators with Quick Attach or Standard 2 Pins. Using the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41 excava...
You may also need...
Yanmar B08-3 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar B08-3 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar B08-3 excav...
You may also need...
Yanmar SV08 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar SV08 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar SV08 excava...
You may also need...
Bobcat X324 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat X324 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Bobcat X324 excava...
You may also need...
JCB 8018 / 8018 CTS Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8018 / 8018 CTS excavators. Using the same hydraulic circuit as...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit JCB 8018 / 8018 CT...
You may also need...
CAT 301.7DCR Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7DCR excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7DCR excav...
You may also need...
CAT 301.7D Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7D excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit CAT 301.7D excavat...
You may also need...
Takeuchi TB216 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Takeuchi TB216 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Takeuchi TB216 exc...
You may also need...
Kubota KX41-2 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41-2 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Kubota KX41-2 exca...
You may also need...
Sany SY80 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Sany SY80 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Sany SY80 excavato...
You may also need...
XCMG XE80E Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit XCMG XE80E excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit XCMG XE80E excavat...
You may also need...
Case CX90 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Case CX90 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Case CX90 excavato...
You may also need...
Case CX80 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Case CX80 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Case CX80 excavato...
You may also need...
XCMG XE20E Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE20E excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE20E excavat...
You may also need...
XCMG XE18U Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE18U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE18U excavat...
You may also need...
XCMG XE15U Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE15U excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit XCMG XE15U excavat...
You may also need...
Deere 110TLB Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 110TLB excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 110TLB excav...
You may also need...
Deere 30G Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 30G excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 30G excavato...
You may also need...
Deere 35ZTS Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35ZTS excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35ZTS excava...
You may also need...
Deere 35G Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35G excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35G excavato...
You may also need...
Deere 35D Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35D excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35D excavato...
You may also need...
Deere 35C Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35C excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 35C excavato...
You may also need...
Deere 27ZTS Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27ZTS excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27ZTS excava...
You may also need...
Deere 27D Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27D excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27D excavato...
You may also need...
Deere 27C Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27C excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 27C excavato...
You may also need...
Deere 26G Wedgelock Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 26G excavators with a wedgelock coupler. Using the same hydraulic circuit...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Deere 26G excavato...
You may also need...
Yanmar SV40 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar SV40 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar SV40 excava...
You may also need...
Yanmar VIO35 Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar VIO35 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Yanmar VIO35 excav...
You may also need...
Yanmar SV40 Tilt Grading Bucket - 36" / 915mm
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar SV40 excavators. Using the same hydraulic circuit as a thumb, the...
This heavy duty 36 inch tilting grading bucket is designed specifically to fit Yanmar SV40 excava...
You may also need...
Bobcat 435 X-CHANGE Tilt Grading Bucket - 48" / 1200mm
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 435 X-CHANGE excavators. Using the same hydraulic circuit as a thumb,...
This heavy duty 48 inch tilting grading bucket is designed specifically to fit Bobcat 435 X-CHANG...